Telecom TANGO SW BLEU Manual De Instrucciones página 40

GB
CODING THE BLEU TRANSMITTERS
The BLEU range transmitters already have a code set in the factory during the
final test.
Copying a code of a transmitter into one of the BLEU range (fig.8)
In this procedure it is important to keep the
1 to point 4 inclusive.
(1) Put the NEW TRANSMITTER in the programming mode by keeping the
nd
RIGHT (2 ch) button pressed and pressing the
(2) The NEW TRANSMITTER LED blinks slowly.
(3) Approach with the TRANSMITTER to be copied (old), as shown in the figure,
and transmit the channel to be copied.
(4) The NEW TRANSMITTER LED blinks quickly.
(5) Release the button of the NEW TRANSMITTER.
(6) Press the button on the NEW TRANSMITTER to which the new code is to be
assigned and only release it when the LED has come on.
4
Repeat the operations for each channel to be duplicated.
40
nd
RIGHT (2 ch) button pressed from point
LEFT (1 ch) button 4 times.
st