Rexel ClassicCut Serie Manual De Instrucciones página 4

Specifications
Model
Product Code
Sheet Capacity 80g/m
2
Cutting Length
Integrated Paper Guide
Size Guide
Diagonal Lines
m NOTE: Please retain this information regarding
safe operation of this paper guillotine
m CAUTION: Guillotine should be operated by an
adult or under adult supervision
m CAUTION: Sharp blade, do not touch the edge of
the blade
m CAUTION: Always secure the safety guard to the
handle using the retaining bracket
m
CAUTION: Do not lubricate the blade
Assembly
The CL710 is completely assembled and ready to use.
For safe operation it is important that the blade guard (1) is
not removed and is always in good working condition (see
fig. A).
Remove protective foil (B) on the blade guard before initial
use.
4
Rexel ClassicCut™ CL710
2102516
50
385mm
A7, A6, A5 & A4
Centimetres & Inches
15, 30, 45 & 60 degrees
1 Blade guard
2 Handle guide
3 Blade and handle assembly
4 Paper clamp
5 Back gauge
6 Locking screw
7 Imperial and metric scale guide
8 Front gauge
9 Extendable paper supports
J Calibration knob for front gauge
K Locking knob for front gauge
m CAUTION: Always latch the blade/handle in the
down, closed position when not in use
m CAUTION: Do not carry the guillotine by holding
the cutting blade or the cutting arm
m CAUTION: Always operate the guillotine with the
safety guard in place
m CAUTION: Before use ensure raised handle blade
does not fall when handle is released.
Do not attempt to replace any parts.
Cutting restrictions
• Remove staples, paper clips etc. before cutting.
• Do not cut metal film, film containing glass etc.
• Do not cut more sheets than cutting capacity allows.
• Do not carry guillotine by holding on to the cutting blade
handle.
• Always operate guillotine with both hands and on a stable
base or desk.
• Check the fittings of the blade and safety cutting rail from
time to time.