Operation Manual (Removable - Nice Giro Instrucciones Y Uso

• Before using the automation for the first time, ask the installer
to explain the origin of residual risks and devote a few minutes to
reading this user instruction and warning manual given to you by
the installer. Keep the manual for reference when in doubt and pass
it on to new owners of the automation.
• Your automation is a machine that performs your commands
faithfully; negligent or improper use may make it dangerous: never
activate automation controls if persons, animals or objects are pre-
sent in the operating range.
• Children: An automation system guarantees a high level of safety,
using its detection systems to prevent movement in the presence
of persons or objects, and ensuring constantly foreseeable and safe
activation. Nonetheless, it is advisable to ensure that children do not
play in the vicinity of the automation. To prevent the risk of acci-
dental activation, do not leave the remote controls within the
reach of children. This is not a toy!
• Check the system often, especially cables, springs and sup-
ports, for possible imbalance or signs of wear or damage.
Every month check that the movement motor reverses when the
door touches a 50 mm high object placed on the ground. Do not
use the automation system if repair or adjustment is necessary
because an installation fault or an incorrectly balanced door could
cause injury.
• Faults: if you notice that the automation is not functioning correctly,
remove the electrical power supply from the system. Never attempt
any repairs; contact your local installer for assistance.
(only for one way versions) The system can be operated manu-
ally: release the gearmotor, as described in "Manual release and
lock".
• Maintenance: As with any machinery your automation needs peri-
odic maintenance so that it may work as long as possible and in
complete safety. Arrange a maintenance schedule with your install-
er with a periodic frequency; Nice advises an intervention every 6
months for normal domestic use, but this period may vary depend-
ing on the intensity of use. Any check, maintenance or repair must
only be carried out by qualified personnel.
• Even if you possess the skills, never modify the system or program-
ming and setting parameters of the automation: this is the respon-
sibility of the installer.
• Testing, periodic maintenance and any repairs must be document-
ed by the person who makes them and the documents stored by
the owner of the system.
The only recommended maintenance operations that the user
can perform periodically are the removal of leaves or debris that
may impede the automation.
(only for one way versions) To ensure that no one can activate
the door, before you begin, remember to lock the automation (as
described in "Manual release and lock") and disconnect all power
sources (including back up batteries, where applicable).
• Disposal: At the end of the automation's lifetime, ensure that it is
disposed by qualified personnel and that the materials are recycled
or scrapped according to current local standards.
Operation manual
(to be delivered to the end user)
(only for one way versions) Manual release and lock
• Releasing the gearmotor:
01. Loosen the lower part of the knob clockwise until you feel a
certain resistance (fig. A);
02. manually open or close the rolling door.
• Locking the gearmotor:
01. Tighten the lower part of the knob anti-clockwise until you feel
a certain resistance (fig. B);
A
B
English – 4