Oscartielle POLARIS D Instrucciones De Uso página 72

Polaris D - Mini Polaris D
English
Remove the lower plate group.
Put the lower plate on a table, remove
the top plate, remove the locking plug
(1) and place them in the new
location as shown in figure B.
Rotate the spring (2) by 180°.
12
A) Remove the locking plugs from
frame holes.
13
B) Put the previously prepared plate
next to frame holes
A) Remove the top nylon plate from
the mobile stud
B) Drill with a bit with Dmax 9mm
next to the hole preset on the left side
to create the housing for the top
14 hinge pin.
Avoid drilling incorrectly centred or
bent holes.
Drilling depth min.18mm max 24mm
C) Install the nylon plate in the new
position using the relative screw
Install the door, now left handed,
being careful to insert the top hinge
first, in the newly drilled hole and
15 then fit it slowly to insert the lower
pin in the special hole on the bottom
plate group.
Restore the electrical connection
being careful to turn plate (1) by 180°
so that the"left door" writing is visible
16 on the its top.
A) Lock the connector
B) Reinsert the cable
C) Fit the screws
70
A
B
1
A
A B
A
1
2
1
1
B
B C
05060144 01 22/08/2014