Tips About Auto Mode; Tips About Indicator Panel - AERMEC MIH R410A Manual De Instrucciones

TIPS ABOUT AUTO MODE

In the AUTO mode, the temperature setting and mode are automatically selected according to
the room temperature and outdoor temperature when the unit is turned on.
Modes and Temperature Settings
• During operation, if the outdoor temperature changes, the temperature settings will auto-
matically slide as shown in the chart.
• Mode of the unit operated first will have priority over unit(s) without reference to the chart.

TIPS ABOUT INDICATOR PANEL

The indicator panel will change each time you press
the DISPLAY button in the following manner.
Room temp. lamp
Temperature
indiactor
The room temperature is
displayed.
NOTES:
• The displayed temperatures are rough estimates and may vary from the actual temperatures.
• Temperature display ranges
Room temperature: 0°C ~ 40°C (
than 40°C)
Outdoor temperature: –9°C ~ 45°C (
higher than 45°C)
• is displayed during the first about 120 seconds of operation while the temperatures are
being detected.
• is displayed for 5 seconds when the unit is not in operation.
the figures in ( ) are temperature settings
Outdoor temp. lamp
The outdoor temperature
is displayed.
is displayed when less than 0°C and
is displayed when less than –9°C and
Temperature
indiactor
E-9
DISPLAY
No display.
when higher
when