Operation - Unold 78402 Instrucciones De Uso

OPERATION

1. Ensure that the appliance is swit-
ched off via the ON/OFF switch.
2. Peel the desired ingredient (for
some ingredients, such as zuc-
chini, this is not necessary) and
cut off the ends with a knife.
3. Check whether the white drive
wheel/the holder is seated in the
appliance.
4. Now insert the desired cutting
insert into the holder. Check whe-
ther the cutting insert is straight
in the holder.
Caution: Always touch
the cutting
on the plastic holder
only, never touch the
blades – danger of
injury!
5. Introduce the tamper with the
food attached into the filling shaft
26
and switch on the appliance via
the ON/OFF switch.
6. Press the tamper lightly down-
wards.
7. As soon as the ingredient is pre-
pared, switch off the appliance
via the ON/OFF switch. Refill the
tamper as needed and proceed as
described until your ingredients
are used up. Please note that prior
to filling the appliance again, it
must always be switched off.
8. Note: The brief operating time is
1 minute. Thereafter allow the
inserts
appliance to cool several minu-
tes before processing more ingre-
dients.
9. Unplug the mains plug when you
are finished preparing the vegeta-
bles.
10. Carefully detach the filling shaft
by turning it anti-clockwise and
lifting it down from the appliance.
11. To easily take out the cutting
insert, from below, press it lightly
upwards and out of the holder.
Copyright UNOLD AG | www.unold.de
The blades of the cut-
ting inserts are very
sharp – danger of inju-
ry!