Remote Control - dirna Bergstrom PGR COMPACT 3.0 Manual Del Usuario

COMPACT 3.0
NOTE: This P4 , function cannot be selected manually. It is activated automatically by
the unit. When the motor is stopped, this function can also be activated automatically by
the unit, if the unit detects that the batteries are fully charged. The unit will remain in this
mode for a while and then it will change onto the selected F4 mode.
Comfort temperature can be controlled by briefly pressing the keys
panel or
F6 Function: ºF Selection
To activate this function, keep the On/Off
F6
shows , and then release the key to directly enable ºF. To return to ºC, keep the
-
control panel
flash; when it stops flashing, press the control panel
disabled when carrying out this operation, meaning it must be activated again once
finished.

Remote control

Remote Control Functions:
1
Unit On / Off
Note: when this Key is pushed, the unit starts in
automatic mode
2
Blower speed control (manual mode only)
Note: while the unit is working in automatic mode
the user press this key, the unit will change the working mode
F0 / P0
to manual
red air flow by pushing this key and the following symbols will
appear on the display:
U1
.
3
Temperature control: The comfort temperature is controlled by briefly pressing
-
the +
of the remote control.
key pressed down with the unit switched off, at which point
F4 P4
/
. This allows the user to choose the desi-
U1 U2
,
keys (15/ 27 ºC- 59/80º F).
key pressed down until the display
+
U3 U4 U5 U4
, , , ,
11
-
+ of the control
key. The remote control is
1
2
F4 P4
/ , if
U3 U2
, , ,
EN
®
C
will
3