Select Cycle - Maytag MD-33 Guía De Uso Y Cuidado

Step 4

Select Cycle

To select a cycle, push in and rotate the control dial to
the desired setting. When using an IntelliDry cycle, the
control dial should point to Normal Dry for most loads.
Loads of larger or bulkier size may require the More
Dry setting to completely dry the load. The Less Dry
setting is best suited for lightweight fabrics or for
leaving some moisture in the clothing at the end of the
cycle.
Permanent Press IntelliDry
The Permanent Press IntelliDry cycle
is designed to dry wrinkle free cottons,
synthetic fabrics, double knits and
permanent press fabrics automatically.
It minimizes wrinkling by providing
an unheated cool-down period at the
end of the cycle.
Special Options
Damp Dry is located on the Time Dry/Air Fluff section
of the dial. It is designed to partially dry items and can
be used with any temperature selection. Damp Dry will
provide 20 minutes of tumbling time, followed by 5
minutes of cool-down tumbling.
Regular IntelliDry
The Regular
designed to dry loads such as towels,
underwear, t-shirts, jeans, etc.
Time Dry/Air Fluff
This cycle can be used to regulate
the drying time. Use with Air
Fluff, Extra Low (select models),
Delicate, Medium or Regular
temperature settings. For timed
drying, turn the control dial until
the pointer points to the proper
time setting in the Time Dry/Air
Fluff cycle.
Note: Using
temperature setting will require
a longer drying time.
Wrinkle Release will release wrinkles from items that are
clean and dry but only slightly wrinkled, such as from a
crowded closet or suitcase, or from sitting in the dryer
too long after the cycle has ended. Wrinkle Release
provides 10 minutes of tumbling followed by five
minutes of cool-down tumbling and can be used with
any temperature selection.
Control features vary by model.
IntelliDry cycle
the Air Fluff
is
4