Inserting Battery - LaserLiner MasterLevel Box Pro Manual De Instrucciones

Safety instructions
Dealing with RF radiation
– The measuring device is equipped with a wireless interface.
– The measuring device complies with electromagnetic
compatibility and wireless radiation regulations and limits
in accordance with the RED 2014/53/EU.
– Umarex GmbH & Co. KG hereby declares that the MasterLevel
Box Pro radio equipment complies with the essential require-
ments and other provisions of the European Radio Equipment
Directive 2014/53/EU (RED). The EU Declaration of Conformity
can be found in its entirety at the following address:
http://laserliner.com/info?an=malebopr
1 Hold function active
2 Slope direction 0.00°
3 ON/OFF button /
READ: Transfer measured
data via Bluetooth
interface
4 Magnetic measuring edge

Inserting battery

1
1
Open the battery compartment
and insert battery according
to the symbols. Be sure to pay
attention to polarity.
MasterLevel Box Pro
1
2
3
4
5
®
5 Battery compartment (Rear)
6 ABS mode active
7 Slope angle
8 ABS mode/relative
measuring mode selection
9 Hold function on/off
6
7
8
9
–
EN
09