Baby auto Zarauz Con 123 Deluxe AB710A Manual De Uso página 21

2. SEAT PARTS AND FITTINGS
A. Cover.
B Group 2 and 3 vertical belt hook.
C. Harness pads.
D. Ergo seat cushion for group 1.
E. Harness straps.
F. Buckle release-button.
G. Locking buckle.
H. Harness adjustment button.
I. Harness adjuster strap.
J. Diagonal belt hook.
K. Childs´s seat base
L. Locking clip.
M. Harness strap slot.
N. Harness pad connector.
O. Group 1 vertical and diagonal belt hook.
P. Harness straps.
Q. Metal harness connector.
3. INSTALLING CHILD SEAT. GROUP 1.
WARNING
1. Fit this child seat into the vehicle´s seat, making sure it is firmly
pressed against the vehicle seat backrest (3.1).
2. Pass the vehicle diagonal shoulder belt below the headrest, pass
the lap belt through the
belt through the
once more through the
safety belt to the vehicle anchor point. You will hear a "click" when
properly fastened (3.2, 3.3, 3.4 and 3.5).
3. Check that the seat belt is not twisted or tangled, that the lap belt
passes under the armrests and that the diagonal shoulder belt
passes under the headrest before proceeding (3.6).
4. Place your knee on the seat of the child seat and hold the diagonal
shoulder belt. Pull it upwards to tighten it as much as possible (3.7).
Group 1/2/3
Only suitable for Group 1, approx.
9 months to 4 years of age (9-18 Kg.)
J guide under the armrest, then slip the
O guides in the plastic backrest, pass the belt
J guide under the armrest and fasten the
www.babyauto.com
EN
21