Error Codes - AgraTronix Ag-MAC PLUS Manual Del Operador

EN
Agratronix moisture meter is equipped with error messages to guide the user to
get the most reliable results, as well as to ensure that the meter is in good
condition.
Error code
Critical Error
7
Weight not detected
8
Taring result is too high
Weight measurement uncertain /
9
meter shook during the measure-
ment
Moisture measurement result stabi-
10
lize slowly
Weight measurement too uncertain
11
/ meter shook during the measure-
ment
Temperature of the sample lower
12
than 2 C / Measurement uncertainty
is high
Temperature of the sample above
13
50 C / Measurement uncertainty is
high
Large temp. diff. between the grain
14
and test cell / Measurement uncer-
tainty has increased
Not on a suffciently level surface,
15
meter warns with sound alarm
16
Weight result is over 330 g
17
Weigh result is under 50 g
Hectoliter weight is 20% higher than
18
average
Hectoliter weight is 20% lower than
19
average
Test cell is not cleared before the
20
measurement

Error Codes

Cause
16
Solution
The meter must be submitted to an autho-
rized service center
Repeat test / Do weight test
Do weight test and check the scale
Keep the meter stable,
measurement uncertainty has increased
Happens to very wet samples
Keep the meter stable, measurement uncer-
tainty has increased
The tester is most accurate when grain and
tester temperature is between 16C and 32C
The tester is most accurate when grain and
tester temperature is between 16C and 32C
For better accuracy, grain and meter test
cell should be at similar temperatures
Keep meter stable during measurement
Check that leveling handle did not stay
above the test cell/ Do weight test
Check that leveling handle did not stay
above the test cell/ Do weight test
Measurement uncertainty has increased, Do
weight test
Measurement uncertainty has increased,
Do weight test
Clear test cell