Health And Safety Precautions - Enofrigo MUSIC Serie Manual De Instrucciones

9.

HEALTH AND SAFETY PRECAUTIONS

The manufacturer has designed and built the machine taking account of the results of a
preventive accurate SAFETY and HEALTH risk analysis.
The protections and devices fitted on the machine therefore comply with the safety levels
established by the specific EEC directives.
Information on and illustrations of said protections and devices to enable the machine user
to operate in conditions of maximum possible safety are provided below.
9.1 Mechanical precautions
The machine is provided with protections designed to prevent accidental contact with the
moving parts. In particular:
• The motor fan is protected by a metal grille and a stainless steel fastening secured
by means of screws to prevent access (danger of shearing).
• DROP-IN models excluded, the machine is provided with 4 castors, 2 of which featu-
re a pedal brake. The machine is stable and does not require any anchoring to the
floor (danger of impact).
9.2 Electrical precautions
The precautions established by the 73/23/EEC directive and the EN 60335 standard have
been adopted to protect against the danger of direct and indirect contacts and all the sche-
duled tests have been performed as certified by the CE declaration of conformity (see
attachment B). All the tests provided for by the current technical regulations for implemen-
tation of the EEC directive concerning EMC (regulation 89/336) have also been performed.
In particular:
• The components are all guaranteed by the manufacturers (each one bears the gua-
rantee marking).
• The equipment and all other electrical components are fitted inside closed compart-
ments in order to prevent any DIRECT contact with live parts. The electrical current
danger signal is affixed to the electrical panel protection:
• To protect against INDIRECT contacts, all the metal parts are earthed by means of an
appropriate lead. Via the plug-socket connection, this lead must ensure electrical
continuity between the machine and the general earth system; the suitability and effi-
ciency of the general system and the accessory equipment necessary for cutting off
Code CT55900010
English - 15
Rev. 03 - 07/'06