Assemble As A Mulcher - GreenWorks BVA803 Manual Del Operador

WARNING
• If the parts have damage, do not use the machine.
• If you do not have all the parts, do not operate the
machine.
• If the parts are damaged or missing, speak to the service
center.
1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with local
regulations.
9.2

ASSEMBLE AS A MULCHER

WARNING
Make sure that the machine is in the OFF position, and the
impellers stop before you attach or remove tubes.
1. Move the front and rear mulcher tubes together until the
lock button engages.
2. Pull the lock button (a) forward to disengage the gate.
a
3. Hold the gate open.
4. Put the "wedged" end clip of the mulcher tube into the
rear clip.
5. Push the "hooked" end clip of the mulcher tube into the
front clip.
English
6. Push back the lock button to engage the mulcher tubes.
You can do the steps above in the opposite sequence to
remove the mulcher tubes.
7. Put the bag adaptor into the blower outlet. Lock the bag
adaptor with the lock button.
It can be necessary to remove the blower tube or mulcher
tubes to clean a blocked tube or impeller.
7
TIP
NOTE
EN