Visual Signals Of The Luminous Disc; Special Accessories; Burner Assembly - Gaggenau VG 425 Instrucciones De Uso

Visual signals of the luminous disc

The luminous disc behind the control knob can display
the following signals. For further information refer to
chapter "Trouble shooting".
Signal
Û
OFF
Ú
lights constantly
ˆ
slow flashing
ˆ
fast flashing
ˆ
alternating fast
flashing
Û
luminous disc off
Ú
luminous disc lights
ˆ
luminous disc flashes

Special accessories

You can order the following special accessories from
your specialist dealer:
AA 414 010 Ventilation molding for operation next to
downdraft ventilation VL 414
VA 420 000 Connection strip for combination with
other Vario 400 appliances for flush
installation
VA 420 001 Connection strip for combination with
other Vario 400 appliances for flush
installation with appliance cover/
extension
VA 420 010 Connection strip for combination with
other Vario 400 appliances for surface
installation
VA 420 011 Connection strip for combination with
other Vario 400 appliances for surface
installation with appliance cover/
extension
VA 440 010 Stainless steel appliance cover
VA 450 400 Appliance extension, 38 cm
Only use the accessories as specified. The
manufacturer accepts no liability if these accessories
are used incorrectly.
Signification
appliance is OFF
appliance is ON
residual heat indicator
safety switch off, power cut
faulty installation

Burner assembly

Always assemble the burner parts correctly and evenly
to avoid faults during ignition or during use. The
catching pins must fit in the corresponding grooves
Normal burner / high output burner assembly
7