Installation; Base Installation; Door Position Adjustment; Door Handle Installation - Transform QL030 Manual Del Usuario

Installation

BASE INSTALLATION

A thorough inspection must be made before installation and any
damages or missing parts must be promptly reported . Do not proceed
with the installation . Do not dispose of packaging before you are
satisfied with your new utility sink.
- Unpack the unit and place the sink (D) on a blanket or cardboard
to protect the surface .
- Turn the cabinet (E) upside down onto the protective surface .
- Gently attach the cabinet base (C) onto its proper location . Using
the supplied base screws (BB), attach the base to the cabinet .
- Attach cabinet feet (B) to the base .
- Gently place the cabinet upright .
CAUTION:
Do not place side load onto feet when righting
the cabinet .
E

DOOR HANDLE INSTALLATION

- Insert the door hand screws (AA) into the pre-drilled holes on
each door .
- Attach the door handles (A) and hand tighten the door handle
screws (AA) .
- Repeat on other door .
QL030
C
BB
B

DOOR POSITION ADJUSTMENT

If the doors need to be repositioned, the hinges can be
adjusted to ensure a precise fit with the cabinet.
1 . The lateral adjustment screw adjusts the door left
or right .
2 . The horizontal adjustment screw adjusts the door
forward or backward .
3 . The vertical adjustment screw adjusts the door up
or down .
6
1
2
3