Using In Macos - i-tec C31DUALDPDOCKPD Manual De Instrucciones

Quick Start
The Standby / Hibernate mode and the Video port – after the activation
of the laptop / tablet from the Standby / Hibernate mode the primary
(original) monitor is displayed, for this reason we recommend using the
monitor that is integrated with the laptop / tablet as the primary monitor,
so that you can log on to the system again.
The Mirror mode – the additional monitor takes on the parameters of
the original monitor in the system, i.e., if you select the Mirror mode and
the original monitor resolution is e.g. 1280x1024 then the screen will be
displayed on the additional monitor with a resolution of max. 1280x1024
(even if you set a higher resolution).
Pressing the keys „Windows" + P you can also easily control the monitors
– for using a monitor in Win 10 you can select: Computer screen only,
Mirror, Extend, Second screen only.
Control the monitor in Windows 10
USING IN MACOS X
After connecting the monitor, the screen on your Mac will glimmer,
which is a standard condition, after stabilization it is possible to perform
standard setting of the monitor here: System Preferences-Displays:
| 13
ENGLISH