• Locate the refrigerator in a well ventilated
place inside the house. Floor must be flat
and strong enough. Turn the leveling
legs up or down in order to level the unit.
• Allow a 30 cm clearance above the appli-
ance. Allow 10 cm min. clearance to walls
and back of the refrigerator. This will al-
low heat dissipation and to comfortably
open and close the appliance door.
Initial start up
• Once the refrigerator is located in its final
place, allow it to rest for half an hour be-
fore connecting it to the power supply.
• Allow the refrigerator to run empty for 2
to 3 hours before loading fresh or frozen
foods. During summer, allow the unit to
run empty for 4 hours considering that
the room temperature is higher.
24
• Wipe the inside and outside of the refrig-
erator with a warm damp cloth. Damp
cloth in a solution made with a small
amount of detergent and warm water. Fi-
nally wipe clean using a cloth dampened
with clean water.
• Please leave enough space at the front so
you can comfortably open and remove
the drawer.
• Dimensions are shown for reference only.