Faq And Troubleshooting - babymoov Milky Now A002301 Instrucciones De Uso

Tabla de contenido

Idiomas disponibles

FUNCTION

x 3

3. The water will then cool down naturally. Note that, the hotter your water, the more time it will take to cool down to

the right temperature.

4. Once the temperature has come down, pour the water used to clean your baby bottle water heater down the sink.

5. Use a cotton cloth to wipe away any remaining water.

TIP.You can also use this function instead of function 2

will take longer to cool down naturally.

To ensure your Milky Now baby bottle water heater works effectively, reduce the build-up of scale and ensure the channels are

clean inside the appliance, make sure you clean your appliance once a week (depending on how often you use it) and also if

you do not use your appliance for two consecutive days.

• To thoroughly clean your appliance, follow the recommendations for function 3

• To regularly clean the appliance, use function 3

To clean the outside of the Milky Now:

- always unplug the appliance and ensure the tank is cold.

- clean the outer casing with a soft damp cloth. Leave to dry naturally.

PROBLEMS

Appliance does not heat

"E2" or "E3" appears on

the control panel

** for heating 0.3L of water from 20°C to 37°C

•

• EASILY CLEANING YOUR BABY BOTTLE WATER HEATER

1. Press the MODE

On selecting this function, the water will boil.

2. The water continues to boil for 3 minutes, then stops. You will hear a beep to let you know

that the appliance has finished its cycle.

Once the water is boiling, you can add a few drops of lemon to the tank to make it easier

to clean.

Once the water reaches 100 °C, press the

round the various channels in the appliance.