WARNING
Risk of injury
Always secure the workpiece in such a manner
that it cannot move while being machined.
Observe the following instructions:
– Do not overload the machine by pressing with ex-
cessive force! The best sanding results are
achieved with moderate application pressure.
The sanding capacity and quality are mainly de-
pendent on the selection of the correct abrasive.
– Hold the machine with one hand on the handle
[1-8].
WARNING
Any maintenance or repair work that requires
opening of the motor or gear housing should only
be carried out by an authorised Customer Service
Centre (name supplied by your dealer)!
Maintenance or repair work carried out by an
unauthorised person can lead to the wrong con-
nection of the power cord or other components,
which in turn can lead to accidents with serious
consequences.
CAUTION
Certain cleaning agents and solvents are harmful
to plastic parts.
Some of these include, but are not limited to:
Gasoline, Acetone, Methyl Ethyl Ketone (MEK),
Carbonyl Chloride, cleaning solutions containing
Chlorine, Ammonia, and household cleaners
containing Ammonia.
16
Working with the machine
The machine shuts down and makes a sound:
Switch off the machine.
Battery pack is empty.
Change the battery pack.
The machine shuts down and does not make a
sound:
Machine is overheated or has been overloaded.
Switch off the machine for 30 seconds.
Reduce the machine load.
If the machine's final speed is then not reached, al-
low the machine to cool down.
Service and maintenance
Risk of injury, electric shock
When carrying out servicing and maintenance
work, always remove the batteries or the mains
adapter from the power tool first.
All maintenance and repair work which requires
the motor housing to be opened should always
be carried out by an authorised service work-
shop.
Warning signal
WARNING
Customer service and repair only
through manufacturer or service
workshops: Please find the nearest
address at:
www.festoolusa.com/service