Introduction; Features; Accessories; Connectors - Phonic KT-8 Manual Del Usuario

INTRODUCTION

Congratulations on your purchase of another great
Phonic product. The KT-8 line array speakers were
carefully designed so as to provide phenomenal
performance in a low-weight, easily-manageable
constructions. Combined with your 2-way crossover
and power amplifiers, the KT-8 passive line array
speakers can create phenomenal sound pressure
levels and extended coverage for all manner of large-
scale installations.
We know how eager you are to get started – getting
the speaker out and hooking up all your gear is prob-
ably your number one priority right now – but before
you do, be sure to carefully read through this manual.
Inside, you will find important facts and figures on the
set up, use and applications of your brand new KT-
8. Remember that safe operation of a speaker is of
the utmost importance, so we strongly recommend
that users heed all warnings and instructions listed
in this manual.

FEATURES

4 8" bass-loaded woofer, 6.5" mid-range woofer with
2" voice-coils
4 Two 1.4" titanium diaphragm tweeters matched
with neodymium magnets
4 Rated power (RMS): 150 Watts (LF), 110 Watts
(MF/HF)
4 Nominal Impedance: 16Ω (LF), 8Ω (MF/HF)
4 Maximum sound pressure level: 128 dB (Peak)
4 120° horizontal, 10° vertical dispersion pattern
4 Straightforward rigging system allows splay
angles from 0° to 8°
4 Exceptionally wide frequency response: 70Hz to
19KHz (-3dB)
4 Bass-reflex configuration for extended low-end
response
4 Made of sturdy, multi-layer birch plywood with
tough black coating
4 Two water and dust resistant Neutrik NL4 con-
nectors

ACCESSORIES

Included
U-Clip / Shackle
Flight Pins
Optional
Mounting Frame Model Number FF640 (640mm)
KT-8

CONFIGURATION

The bi-amp system requires two amplifier channels
to operate. Using a single cable, it is possible to con-
nect the tweeter/mid-range and the woofer to their
own respective amplifier channels. This configuration
guarantees greater sound fidelity, higher dynamism
and a significant increase in sound pressure.
1+
1-
2+
X-OVER
2-

CONNECTORS

The KT-8 features a 4-pin NL4 speaker connection.
This provides positive and negative connectors for
the low frequency woofer as well as the mid-range
and tweeter.
The KT-8 line-array speaker has both an "IN" and a
"THRU" connector on the rear panel. The connector
labelled "IN" is for connecting your amplifier to the
speaker, while the "THRU" connector is for chaining
additional speakers to share the amplifier's power.
+
LF
-
HF
MF
1