Cleaning And Maintenance - VOX electronics BBM-1345 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 87
16. Remove the bread carefully from the pan and cool for about 20 minutes before slicing.
17. If you are out of the room or have not pressed START/STOP button at the end of
operation, the bread will be kept warm automatically for 60 minutes (if applicable) and
when keep warm is finished, the beeps will be heard.
18. When the appliance is not in use or after it has completed the operation, unplug the
power cord.
CAUTION: Before slicing the loaf, use the hook to remove the kneading blade hidden
on the bottom of the loaf. Never use your hand for removing the kneading blade as the
loaf is hot.
NOTE: If the bread has not been completely eaten, you should put it in a sealed plastic
bag or a vessel. Bread can be kept for about three days at room temperature. If you
want to keep the bread longer, pack it in a sealed plastic bag or vessel and put it in the
refrigerator. The storage time is at most ten days.

CLEANING AND MAINTENANCE

Unplug the appliance and allow to cool completely before cleaning.
1. Bread pan: Remove the bread pan by turning it in anti-clockwise, and then pull the
handle to remove it
any sharp abrasive agents for the consideration of protecting the non-stick coating. The
pan must be dried completely before installing.
NOTE: Insert the bread pan in the correct position and then press it down. If it cannot
be inserted, adjust the pan lightly to find the correct position and then press it down.
2. Kneading blade: If the kneading blade is difficult to remove from the axle, you should
fill the container with warm water and allow it to soak for approx.30minutes.The
kneading blade can then be easily removed for cleaning. Also wipe the blade carefully
with a damp cotton cloth. Please note that the bread pan, kneading blade and ingredient
box are dishwashing safe components.
3. Lid and view window: Clean the lid inside and outside with a slightly damp cloth.
4. Housing: Gently wipe the outer surface of housing with a wet cloth. Do not use any
abrasive cleaner to clean as this would degrade the high polish of the surface. Never
immerse the housing into water for cleaning.
5. Before the bread maker is packed for storage, ensure that it completely cool, clean and
dry. Put the spoon and the kneading blade in the pan, and close the lid.
.
Wipe inside and outside of the pan with damp clothes. Do not use
10

Publicidad

Tabla de contenido
loading

Tabla de contenido