Optional Accessories - Makita BO4900V Manual De Instrucciones

Connecting to vacuum cleaner
When you wish to perform cleaner operation, connect a
vacuum cleaner to your tool. Connect a hose of vacuum
cleaner to the dust nozzle.
OPERATION
CAUTION:
• Never run the tool without the abrasive paper.
You may seriously damage the pad.
• Never force the tool. Excessive pressure may
decrease the sanding efficiency, damage the
abrasive paper or shorten tool life.
• The front grip is a screwed type one. Always
be sure that the front grip is tightened securely
before operation.
Turn the tool on and wait until it attains full speed. Then gently
place the tool on the workpiece surface. Keep the base flush
with the workpiece and apply a light pressure on the tool.
MAINTENANCE
CAUTION:
• Always be sure that the tool is switched off and
unplugged before attempting to perform inspec-
tion or maintenance.
• Never use gasoline, benzine, thinner, alcohol
or the like. Discoloration, deformation or cracks
may result.
To maintain product SAFETY and RELIABILITY, repairs,
carbon brush inspection and replacement, any other
maintenance or adjustment should be performed by
Makita Authorized or Factory Service Centers, always
using Makita replacement parts.

OPTIONAL ACCESSORIES

CAUTION:
• These accessories or attachments are recom-
mended for use with your Makita tool specified
in this manual. The use of any other accessories
or attachments might present a risk of injury to
persons. Only use accessory or attachment for
its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• Abrasive papers (with pre-punched holes)
• Abrasive papers (without pre-punched holes)
• Abrasive papers (with pre-punched holes, hook-
and-loop type)
• Punch plate
• Pad (for conventional type)
• Pad (for hook-and-loop type)
• Dust nozzle
• Dust bag
• Paper dust bag
• Paper dust bag holder
6 ENGLISH