Installation - RK Rose+Krieger Powerlift telescope Manual De Instrucciones

7. Life phases

7.5 Installation

For installing the adaptation system -top- onto the lifting column, use only the screws and
washers supplied.
With lifting columns of type RKPowerlift telescope, RKPowerlift M, RKPowerlift S,
RKPowerlift Z and Multilift, the respective fastening screws will be inserted through the bot-
tom plate and screwed into the screw channels of the inner profile of the lifting column or in the
cover plate.
With the lifting column types Alpha Colonne II medium and Alpha Colonne II large, the fastening
screws are inserted from underneath through the cover plate and screwed into the bottom plate.
The illustration shows the RKPowerlift M with
mounted adaptation system -top-.
With RKPowerlift telescope, RKPowerlift M, RKPowerlift Z, RKPowerlift S as well as Alpha Co-
lonne II large and Alpha Colonne II medium, the unit can be installed on the inner profile offset by
90° depending on the installation position.
42
The illustration shows the RK Alpha
Colonne II large with mounted adaptation
system -top-.