SATA SATAminijet 1000 K Instrucciones De Servicio página 554

Operating Instructions SATAminijet 1000 K/H RP/HVLP
US
Malfunction
Air bubbles in suction
cup.
Spray pattern too
small, slanted,
one-sided or split.
Round/flat fan control
not working – control
can be turned.
Round/flat fan control
cannot be turned.
554
Cause
Air nozzle loose.
Space between air
nozzle and paint noz-
zle ("air circuit") dirty.
Nozzle set dirty.
Nozzle set damaged.
Not enough spray me-
dium in suction cup.
Paint needle gasket
defective.
Bore holes in air noz-
zle clogged with paint.
Paint nozzle tip (paint
nozzle in) damaged.
Air distribution ring
positioned incorrectly
(pin not in bore hole)
or damaged.
Round/flat fan control
turned too sharply
counterclockwise;
spindle in gun thread-
ing loose.
Corrective action
Tighten air nozzle by
hand.
Clean air circuit. Read
and follow cleaning
instructions (see 10).
Clean nozzle set. Read
and follow cleaning
instructions (see 10).
Replace nozzle set
(see 9.1).
Fill suction cup
(see 8.2).
Replace paint nozzle
packing (see 9.3).
Clean air nozzle. Read
and follow cleaning
instructions (see 10).
Check paint nozzle tip
for damage and replace
nozzle set if necessary
(see 9.1).
Replace air distribution
ring (see 9.2).
Remove round/flat fan
control with universal
wrench and make oper-
ational or replace com-
pletely (see 9.6).