Ibiza Light DERBY-LAS Manual De Instrucciones página 3

Specifications
Voltage .................................................................................................................. 220-240V AC~ 50/60Hz
Consumption ...................................................................................................................................... 40W
Laser class .............................................................................................................................................. 3B
Laser diode ........................................................................... Red: 120mW 650nm; green: 30mW 532nm
LED source ...................................................................................................................................... 9 x 3W
LED colours ..................................... Red, Green, Blue, White, Warm White, Orange, Yellow, Purple, UV
Dimensions ................................................................................................................. 185 x 162 x 210mm
Weight ............................................................................................................................................. 1.48kg
Power supply, wire Connection
Use a dedicated plug to connect the LED light and power. Make sure the unit is connected to the appropriate
power supply.
Warning
Carry the lights only by the handle.
Features
The control panel features 4 buttons and a 4-digit LED display.
Operation
1) When power is on, the digital LED display works with red dots. When
a DMX signal is present, the dot will be shiny.
2) DMX address code setting: Press "MENU" button. When the digital LED displays d001-d512, press "UP" or
"Down" to set the address code. The code ranges from 001-512.
Button Specifications:
All Effects
Autn An01-An07

Derby effects
Autp Ap01-AP07

Laser effects
AutF AF01-AF04

Sound effect - Whole Unit
Sound S.01-S.03

SLAU Slave

D001-d512 DMX

Connection of Signal Cable
You can use the 3-pin XLR cable to connect the OUT socket of the first light and the IN socket of the following
light. Connect all the lights as below:
©Copyright LOTRONIC 2016
Motor Speed
S.01-S.09

Motor Speed
S.01-S.09

Motor Speed
S.01-S.09

Sound Effect - Derby
S0.4

3
Sound Effect - Laser
S.05

DERBY-LAS