Ibiza Light DERBY-LAS Manual De Instrucciones página 5

160-169
170-179
180-189
190-199
200-209
210-219
220-229
230-255
CH2 0-9
10-255
CH3 0-255
CH4 0-255
CH5 0-255
CH6 0-255
CH7 0-63
64-127
128-191
192-255
CH8 0-255
Fixture Cleaning
The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize
light output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or
particularly dirty surrounding can cause greater accumulation of dirt on the unit's optics.
Clean with soft cloth using normal glass cleaning fluid.
•
• Always dry the parts carefully.
Clean the external optics at least every 20 days. Clean the internal optics at least every 30/60 days.
•
VII. Trouble-shooting
Problem
No display when power is on
Light is out of control
The light is off after working for a while
The beam is dark
This marking indicates that this product should not be disposed with other household wastes throughout
the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable reuse of material resources. To return your used device,
please use the return and collection systems or contact the retailer where the product was purchased. They can
take this product for environmental safe recycling.
©Copyright LOTRONIC 2016
(AF01-AF04)
Sound Effect
(Whole Unit)
(S.01-S.03)
S.04 Sound Effect (Derby)
S.05 Sound Effect (Laser)
/
Speed adjustable
Derby (Red, Blue, Warm White)
Derby (Orange, White, Yellow)
Derby (Green, Purple, UV)
Motor Speed
/
Red Laser
Green Laser
RG Laser
Laser Motor Speed
1. Check if the power is correctly connected.
2. Check if the outlet is powered
1. Check if the DMX address code is correctly set.
2. Check if the DMX cable is correctly connected.
1. Check if the sensor is soldered on the LED PCB
2. Check if the temperature is too high or not.
3. Check if Power supply is damaged.
1. Check if the temperature is too high and cause a fast fade.
2. Check if there is too much dust on the surface of light.
5
Solution
DERBY-LAS