Publicidad
without turning back, while in motion.
36.The child must not jump with the tricycle from curbs or other higher parts, as well as bumping into them.
37.Do not use the tricycle in rainy days.
38.The use of the tricycle in rainy/ wet weather may lead to damages or rust to the product. Keep the product away from
water.
PARTS OF THE TRICYCLE
Before assembly of the tricycle, take all the parts out of the packing and check if all of the bellow listed are present. Keep the
packages until you finish the assembly completely. SEE FIGURES A and B.
1. Seat and backrest; 2. Safety board; 3. Front tire; 4. Front basket; 5. Parent control handle; 6. Frame; 7. Rear bag for toys;
8. Footrest; 9. Bottle/ cup holder; 10.Handlebar; 11. Screw for seat; 12. Canopy; 13. Saddle; 14. Rear tires; 15. Break; 16.
Safety belt; 17. Handlebar grip; 18. Front fender; 19. Front fork; 20. Pedal
ASSEMBLY STEPS
1.Step 1 – See Figure 1: Unfold the frame and fix the rear tire in the rear part of the frame.
2.Step 2 – See Figures 2 and 3: Place the front fender at the front fork. Slide the front fork and the front tire in the opening
in the frame. Be careful how the fender is pointed. Put the steering wheel on top of the front part of the frame and push
down. You will hear a clicking sound showing the successful fix of the two parts to each other. Check if the assembly is
successful. Rotate the steering wheel to the left and right. If it controls the front fork and the fork does not fall out of the
frame, then you have assembled the parts correctly.
3.Step 3 – See Figures 4 and 5: Put the base of the seat on the frame correctly according to the ribbing (Figure 4). After
that attach the seat by aligning it with the fixing screw (Figure 4). The screw must pass through the bottom part of the seat.
Fix the seat with the screw by spinning it with its black lid. (Figure 5).
4.Step 4 – See Figures 6 and 7: Fix both of the parts of the safety board to the supports on each side of the seat (Figure 6).
Slide one of the parts of the safety board through the opening of the crotch part of the soft seat (Figure 7). After that the
parts of the safety board to each other.
5.Step 5 – See Figure 8: Put the tubes of the canopy in the plastic tubes on each side of the backrest. Push gently
downwards to secure the canopy. You will hear a click showing that the tubes are in place.
6.Step 6 – See Figure 9: Fix the footrest to the frame of the tricycle by using a screw.
7.Step 7 – See Figures 10 and 11: Attach the parent control handle to the bottom tube in the rear part of the frame (Figure
10). Use the red plastic clamp to fix it (Figure 11).
8.Step 8 – See Figure 12: Put the fabric toy bag on the hanger on the parent control handle. Using the velcro straps attach
the bag to the rear frame.
9.Step 9 – See Figure 13: Attach the bottle/ cup holder to the parent control handle.
10.Step 10 – See Figure 14: Attach the front basket to the front bottom part of the steering wheel.
PRODUCT FUNCTIONS
1.Seat with a 360 degrees rotating function – To turn the seat so that the child faces the parents or the road, use the
screw in the base of the seat. Turn the seat so that the child faces the parent. Always fix the seat with the screw.
2.Backrest – The backrest can be adjusted in several laying positions using the button on its' back part. Push it and in the
same item put the backrest in the wanted position. Release the button in order to fix the seat.
3.Foot rest – Slide the button downwards, which is located in the middle of the footrest axle to fold or unfold the steps.
4.Folding frame – Fold the back part of the tricycle frame by pushing the red button and in the same time slide the rear
frame to the front part of the tricycle.
5. Regulating the parent handle – press the button located in the middle of the handles and fix it at your desired height.
CLEANING AND MAINTENANCE OF THE PRODUCT
1. Cleaning:
•
Clean with soft dry cloth. Do not use aggressive cleaning detergents - alcohol or bleach – based ones, or such,
containing abrasive particles.
•
Do not spray water or other liquids directly on the tricycle during play or cleaning. This way you will avoid the risk of
damage of the tricycle due to rush on the metal parts and disturbance in the stability of the connections.
•
Clean the tires regularly from sand or dust.
•
Keep the tricycle clean.
2. Maintenance and storage:
•
Before each use of the tricycle, check carefully the working order of all parts and connections:
-
The screws must be tightened well;
-
The wheels and handlebar must be strong and fixed stably;
-
The wheels must move freely.
•
You must not use the tricycle if you find that there are any loose, worn or damaged parts.
9
Publicidad
