NAD 510 Manual Del Usuario página 6

GB
Pressing REPEAT a second time puts the player
into Disc Repeat mode. This will continuously play
the whole disc, returning to Track 1 each time the last
track has been finished. In Disc Repeat, 'REPEAT'
flashes in the Display Panel.
Pressing REPEAT a third time cancels the Repeat
function and returns the NAD 510 to normal play from
the current track. Pressing STOP also cancels the
Repeat mode.
11. SKIP
The SKIP buttons will move the 510 on to the next
track or back to the previous track on the disc.
In Stop mode, use Skip to select a particular track on
the CD. Press SKIP Forward
to select the required track number, which is
shown in the Track Display. Pressing Play will then
play the rest of the CD from that track number
onwards.
In Play mode, pressing SKIP Forward
the start of the next track. Pressing SKIP reverse
jumps to the start of the previous track. After using
Skip, the NAD 510 will then play all remaining tracks
on the disc. If the disc is encoded with Index points
within tracks, then Skip will jump to the start of the
next or previous Index point.
Skip also functions in Random Mode, jumping to
the start of the next or previous track in the Random
Play sequence.
12. SCAN
The SCAN buttons fast forward or fast reverse
through the tracks on the disc, giving an audible indi-
cation of the contents of the tracks.
NAD
6
To fast forward through a track in Play or Pause
modes, press and hold down the SCAN Forward but-
ton and listen, or use the Track and Time displays,
to find the required position on the track or disc.
Release the SCAN button when the required position
is located.
To move backwards through the track or the disk,
press and hold down the SCAN Backwards
to find the required position.
Scan function stops when the beginning or the end
of the disc is reached.
HANDLING AND LOOKING AFTER COM-
or SKIP reverse PACT DISCS
Compact discs need to be handled with care.
Always hold the discs by the outer edges and avoid
touching the playing (non-printed) surface of the disc.
Remove the disc from the NAD 510 when it is not
jumps to
being played and store it in its CD case.
Minor scratches and finger marks will not affect the
ability of the disc to play, although larger marks and
damage may cause the disk to skip, repeat very short
sections or stop altogether.
If this happens, inspect the disk for dirt or damage.
Clean CDs by wiping the playing surface with a soft
dry cloth. Wipe from the centre of the disc outwards
rather than radially. If the CD playing surface
becomes dirty, lightly dampened the cloth with soapy
water to remove any dirt and then wipe with a cloth
lightly damped with water only. Do not use LP record
cleaning solutions on your CDs.
button