NAD 510 Manual Del Usuario página 7

IN CASE OF DIFFICULTY: A TROUBLE-SHOOTING GUIDE
If you have followed the instructions and are still having difficulty operating your compact disc player, locate the
PROBLEM in the left hand column below. Check the corresponding POSSIBLE CAUSE and REMEDY columns
to locate and solve the problem.
PROBLEM POSSIBLE CAUSE
No power when the Poor or no power plug connection
POWER button is set at the AC outlet.
to ON.
Disc play does not start. The disc is loaded upside down
The disc is too dirty
No Sound. Incorrect audio cable connections.
Incorrect amplifier/receiver operation
Sound Skips. The CD player is subject to vibration
or physical shock from external sources.
A"humming" sound can be heard. Loose cable connections.
GB
REMEDY
Insert the power plug firmly into
the AC outlet.
Reload the disc with the label
side UP.
Clean the disc.
Connect the CD player to the
amplifier/receiver correctly.
Make sure that the input
selector on your amplifier or
receiver is set to CD.
Change the installation location.
Check the cable connections
particularly the phono
connecting cables
NAD
7