Changing The Bulb; Maintenance And Cleaning; Disposal - LIVARNO LUX 14117201L Instrucciones De Montaje, De Uso Y De Seguridad

Changing the bulb / Maintenance and Cleaning / Disposal

Changing the bulb

RISK OF ELECTRIC SHOCK!
When replacing the illuminant, first disconnect the
light from the mains. To do so, remove the fuse or
switch off the circuit breaker in the fuse box
(0 position).
CAUTION! DANGER OF BURNS DUE
TO HOT SURFACES! Allow the light to cool
down completely.
Only replace the illuminant
cooled down.
Use a clean, lint-free cloth when replacing the
illuminant .
9
Model 14117201L / 14117206L:
Turn the defective bulb
wise out of the bulb socket
Only use the light bulbs specified in chapter
„Technical Data".
Carefully screw the new bulb
socket . Ensure that it is positioned correctly.
6
Model 14117301L / 14117306L:
Loosen the fixing screws
washer and take off the cover
16
lamp shade .
7
Turn the defective bulb
wise out of the bulb socket
Only use the light bulbs specified in chapter
„Technical Data".
Carefully screw the new bulb
socket . Ensure that it is positioned correctly.
6
Place the lampshade
Position the lampshade
so that the spacer
the middle of the cover
Place the washer
16
attach the cover with the lampshade
the fixing screws
17
Reinsert the fuse or switch the circuit breaker
back on.
18 GB/IE
once it has fully
9
carefully anticlock-
9
.
6
into the
9
, remove the
17
with the
15
carefully anticlock-
9
.
6
into the
9
onto the cover
7 15
with the cover
7
comes out of the hole in
13
.
15
onto the spacer and
13
using
7
.

Maintenance and Cleaning

Disconnect the light from the mains circuit before
cleaning. To do so, remove the fuse or switch off
the circuit breaker in the fuse box (0 position).
Allow the light to cool down completely.
Only use a dry, lint-free cloth for cleaning. Do
not use solvents, benzene or similar sub-
stances. They could damage the light.
Replace the fuse or switch on the circuit
breaker (Position I) inside the fuse box.

Disposal

The packaging is made entirely of recy-
clable materials, which you may dispose
of at local recycling facilities.
Observe the marking of the packaging
materials for waste separation, which
b
a
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and fibre-
board / 80–98: composite materials.
The product and packaging materials
are recyclable, dispose of it separately
for better waste treatment. The Triman
logo is valid in France only.
. Contact your local refuse disposal author-
ity for more details of how to dispose of
15
your worn-out product.
To help protect the environment, please
dispose of the product properly when it
has reached the end of its useful life and
not in the household waste. Information
on collection points and their opening
hours can be obtained from your local
authority.
RISK OF ELECTRIC SHOCK!