Remove The Battery Pack; Adjust The Harness; Remove The Harness; Operation - GreenWorks Pro BLB484 Manual Del Operador

EN
10.6

REMOVE THE BATTERY PACK

1. Push and hold the battery release button.
2. Remove the battery pack from the machine.
10.7

ADJUST THE HARNESS

1. Fit the backpack on your back.
2. Pull the ends of the straps down to tighten the harness.
3. Connect the horizontal chest strap.
4. Pull the end of the chest strap to tighten.
1
5. Lift the tabs of the adjusters to loosen the straps.
3
6. Lock the quick-release fastener by pushing it together.
English
2
4
7. Squeeze the hooks to open the quick-release fastener.
Install the back pad against your back tightly and safely.
1
10.8

REMOVE THE HARNESS

1. Open the quick-release fasteners on the chest strap.
2. Loosen the harness straps by lifting the sliding adjusters
and then take off the machine.
WARNING
In the event of imminent danger, quickly remove the
machine. Release the chest strap before you put the machine
on the ground.
11

OPERATION

WARNING
Make sure the blower tube is in position before operation.
11.1

START THE MACHINE

1. Pull the trigger (3) to start the machine.
2. Pull the trigger fully to increase the speed.
3. Release the trigger to decrease the speed.
8
NOTE
2
1