Safety Symbols; General Safety Rules; Work Area Safety; Electrical Safety - RIDGID micro CD-100 Manual Del Usuario

micro CD-100 Combustible Gas Detector

Safety Symbols

In this operator's manual and on the product, safety symbols and signal words are used to communicate important safety information. This
section is provided to improve understanding of these signal words and symbols.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this
symbol to avoid possible injury or death.
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.
DANGER
WARNING
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE NOTICE indicates information that relates to the protection of property.
This symbol means read the operator's manual carefully before using the equipment. The operator's manual contains important in-
formation on the safe and proper operation of the equipment.

General Safety Rules

Read all safety warnings and in struc tions. Failure to follow the
warn ings and instructions may result in electric shock, fire
and/or serious injury.
SAVE THESE INSTRUCTIONS!
The EC Declaration of Conformity (890-011-320.10) will accom-
pany this manual as a separate booklet when required.

Work Area Safety

• Keep your work area clean and well lit. Cluttered or dark areas
invite accidents.
2
WARNING
• Do not operate equipment in explosive atmospheres, such
as in the presence of flammable liquids, gases or dust.
Equip ment can create sparks which may ignite the dust or fumes
• Keep children and by-standers a way while operating
equipment. Distrac tions can cause you to lose control.

Electrical Safety

• Avoid body contact with earthed or grounded surfaces such
as pipes, radiators, ranges and refrigerators. There is an in -
creased risk of electrical shock if your body is earthed or
grounded.
• Do not expose equipment to rain or wet conditions. Water
en tering equipment will increase the risk of electrical shock.