Metabo HPT UC 18YTSL Manual De Instrucciones página 9

Cargador multipuerto
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Port No.
1
2
3
4
Total charging time
* Charging time will vary depending on the residual capacity of the batteries.
General points applying to both modes
○ The battery currently being charged is the port indicated by the steady red illuminated
charge indicator lamp.
○ Batteries that are hot immediately after being used or cold due to low-temperature
conditions take longer to charge, so they are skipped and charged after the other batteries.
○ If charging is taking a long time, press the selector switch twice.
This resets the charger, reassesses batteries that are either hot immediately after use or
cold due to low-temperature conditions, and skips them before resuming charging.
Normal mode
○ If a battery is inserted in a port with a lower number (i.e., higher priority) port while other
batteries are being charged, charging of the newly inserted battery will start after the
battery currently being charged has been fully charged.
Multi mode
○ If rechargeable batteries are used before they are fully charged, the level of charging may
vary from battery to battery.
○ Inserting a depleted battery into a vacant port while other batteries are being charged will
increase the time taken to charge all the batteries.
Table 1 Charging example
Rechargeable battery
BSL 1850
BSL 36B18
BSL 1860
BSL 1430C
Charging time*
32 minutes
52 minutes
38 minutes
30 minutes
152 minutes
English
9

Publicidad

Tabla de contenido
loading

Tabla de contenido