Velleman CAMIP15 Manual Del Usuario página 21

Seedonk iSecurity+
In the camera settings, you can access a trial version of the
iSecurity+ software: it supports push notification and Cloud
video recording. (See fig. 21)
1. Press Yes to start the trial.
2. Define the motion sensitivity and switch on the motion
detection function.
For more details, visit www.seedonk.com
Attention
For your safety, if someone logs into your account, a
message appears on your mobile device. (See fig. 22)
Troubleshooting
LED status indicators
Wi-Fi setup
Network
Power
Reset Button
Use a thin pin to press and hold the reset button for about
10 seconds to reset the camera. (See fig. 23)
FAQ
Q1. I have more than one camera. Can I use the same user
account to connect the other cameras too?
A: You can add an unlimited number of cameras to your
Seedonk account as long as you give each of them a
different name. (See fig. 24)
V. 01 – 11/07/2012
CAMIP15
green setup mode on
orange setup mode initialising
off setup mode off
green connected to Seedonk
orange connected to local network
flashing not connected to any
orange network
green power on
21 ©Velleman nv