dirna Bergstrom bycool DINAMIC 1.1 Instrucciones De Montaje página 18

DINAMIC 1.1
EN
Assembly
Recommendations
• Before starting assembly, please read instructions and
follow them during installation process.
• Use the adequate tools for each operation.
Electricity
• Disconnect ignition key.
• Disconnect battery before starting assembly.
• Make sure electric components are securely connected,
checking their correct fitting.
! Warning
If, during assembly, the unit becomes slanted or the
cabin drops with the unit mounted, wait for at least
60 minutes from the moment the unit is horizontal
before starting up.
! Warning
Vehicles in which the electrical connection is to
additional independent batteries as opposed to the
vehicle ignition batteries,
configured to new battery cut-out parameters as an
option (see page 32).
Indications concerning position are:
RIGHT: Passenger side
LEFT: Driver side
Driving torques (N.m)
Fillet
8.8
M6/100 10
Hoses assembly
Driving torques (N.m)
Hose size
1/4"
3/8"
the electronics can be
Steel Quality
Wrench
opening
10.9
13
Fitting
Driving Tool
Torque
13-15 Wrench 14mm.
15-17 Wrench 19mm.
Ratchet wrench of 10
Cruciform screwdriver TOP 10
Wrench of 10, 11, 14, 17, 19
Allen key of 5
Socket wrench of Ø10
Drill
Broach Ø 4, Ø 6, Ø 9
Circular saw Ø 19, Ø 22, Ø 48
Scissors
Riveter M6
Fragile
Beware of cuts!
Electrical hazard
Mounting instructions
User's guide
Troubleshooting
Warranty
!
The installing personnel must have a sufficient training in
vehicles air conditioning.
!
dirna Bergstrom shall not be responsible for breakdowns or
damages coming from an inadequate handling or installation
of the equipment or from modifications and substitutions
carried out without our express and written authorisation.
!
Unit pre-loaded with R-134a gas. Do not tamper with
the refrigerant gas circuit.
!
Please see product warranty procedure included in
10
Troubleshooting.
!
Please see equipment User's Guide for its correct
functioning of the remote control and control panel.
!
Once installation is finished, the following documents must
be handed over to the user: User's Guide, Warranty and
Troubleshooting.
18
Tools
Symbology
Documentation included
!
Warnings
®
1001321985
220AA11032
220AA11031
220AA10017