Marking And Identification; Mounting Of The Hose - Piusi HA20 Manual De Uso

6 - MARKING AND IDENTIFICATION

CERTIFIED COMPANY
UNI EN ISO 9001
MADE IN ITALY
PIUSI S.p.a.
46029 Suzzara
(MN) ITALY
HA60151200
OIL HOSE REEL 1/2" - 15 m
WEIGHT: 19 Kg Pmax: 60 bar
LOT NUMBER:
ATTENTION: READ MANUAL
7 - MOUNTING OF THE HOSE (Models without hose)
7.1
7.2
AP
7.3
7.4
4500098802/10
The hose reels without hose are supplied with the unloaded
spring.
Use a hose with dimension and pressure characteristics suitable
for use according to the hose reel model.
Normally, the hoses must be connected Female Straight Gas, ex-
cept for those to be used for the following fluids which must have
these characteristics:
-Oil (3/4"): EN857 1SC hose with fitting F.90° 3/4"G.
-Oil (1"): EN857 1SC hose with fitting F.S.1"G.
7.0) Fix the hose reel to the bench and remove plastic protec-
tion.
7.1) For models with hose <5/8".Put the hose between the gui-
de rollers, connect it to the fitting which is inside the drum
and tighten by the suitable wrench.
7.2) Models High Pressure 1"(HP): connect the hose (A) to the
curve, tightening with the suitable wrench. Tighten the nut
(B) on the connection of the drum.
7.3) Mount the lateral protection and rotate manually the drum
in order to rewind completely the hose.
7.4) Spring Preload: hold the hose-end and rotate the drum in
the opposite direction for a few laps, refer to the tables p.40
7.5) Insert the hose-end between the guide rollers and put the
hose rubber stopper at the desired length.
7.6) Unwind the hose and rewind it completely, to check if the
hose reel works properly.
7.5
- 11 -
We affix the CE marking as the manu-
facturer of this equipment.
On the equipment is securely attached
a tag with curing adhesive system on
which, in addition to the name of the
manufacturer and the symbol "CE", all
necessary information for good identifi-
cation of the machine are indicated
(model, duty, year of construction,
weight, etc.).
WARNING!
WARNING! DO NOT PUT
HANDS OR ANY OTHER
THING INSIDE THE DRUM!