Change The Spray Tip; Use The Spray Gun; Nozzle Type - GreenWorks Pro GPW2700 Manual Del Operador

CAUTION
Inspect the filter in the water inlet connector before you
connect the garden hose
• If the filter is damaged, do not use the machine until the
filter is replaced.
• If the filter is dirty, clean the filter.
17
1. Uncoil the garden hose (17).
2. Let the water flow through the garden hose (17) for 30
seconds.
3. Turn the water supply off.
4. Install and tighten the end of the garden hose (17) to the
water inlet (8) connector.
CAUTION
There must be a minimum of 10 feet of free hose between
the water inlet and the water supply.
4.2

USE THE SPRAY GUN

WARNING
For safe control, keep your hands on the spray gun at all
times.
• Pull and hold the spray gun trigger (21) to start the
machine.
• Release the spray gun trigger (21) to stop water flow
through the spray tip.
4.2.1 UNLOCK THE SPRAY GUN TRIGGER
• Push the trigger safety lock-out (21) down until it clicks
into the slot.
English
8
22
21
4.2.2 LOCK THE SPRAY GUN TRIGGER
• Push the trigger safety lock-out (21) up and into it's
original position.
4.3

CHANGE THE SPRAY TIP

18
19
WARNING
Before you change the spray tip:
1. Pull the spray gun trigger to release water pressure.
2. Engage the trigger safety lock-out on the spray gun.
3. Stop the machine.
WARNING
Do not point the spray wand at your face or others'.
4.3.1

NOZZLE TYPE

SPRAY TIP APPLICATION
Yellow - Narrow fan tip (15° )
• The yellow pressure washer tip pro-
vides high versatility with its 15 de-
gree angle tip. Referred to as the
washing tip, because it provides ade-
quate pressure to remove dirt from
surfaces, but is designed to not dam-
O
15
age many surfaces. This pressure
washer tip is designed for "sweep-
ing" foliage or debris given its wide
angle. This tip is versatile due to its
wide area of cleaning and strong
pressure application.
9
EN