Bluetooth Operation; Troubleshooting - Party Light & Sound PARTY-BOX212 Manual De Instrucciones

BLUETOOTH OPERATION

1. Turn on the unit and press the MODE button on unit to select the Bluetooth function.
2. Activate the Bluetooth feature on the external device to be paired.
3. Initiate a search for devices. The device shows up as "BT SPEAKER".
4. Press the   to start playing and the buttons  and  for the selection of songs.
Trouble shooting
If a problem occurs, follow the steps in the table below. If problem still can't be solved, please contact your
retailer.
Problem
No sound when power
on
No sound from the
microphone
No sound after inserting
USB/SD card
If Speaker makes loud
noises
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local
authorities or your dealer about the way to proceed.
Lire attentivement le manuel et le conserver pour référence ultérieure.
L'éclair dans le triangle attire l'attention sur un danger physique (due à une électrocution p.ex.).
Le point d'exclamation dans le triangle indique un risque dans la manipulation ou l'utilisation de
l'appareil
ATTENTION:
1. Ne pas placer de petits objets tels que des pièces ou des trombones sur l'appareil car ils risquent
de tomber à l'intérieur de l'appareil. Vous risquez de provoquer un incendie ou une électrocution.
Si un liquide ou un objet pénètre dans l'appareil, débranchez immédiatement la prise secteur et
contactez votre revendeur.
2. Pour débrancher la fiche secteur, tirez toujours sur la fiche, jamais sur le cordon.
©Copyright LOTRONIC 2017
Possible cause
1. No input source
2. Volume down
1. Bad mic connection
2. Mic not switched on
3. Mic volume down
1. Incorrect file format
2. Bad connection of USB/SD card
1. Microphone switched on but
may be too close to the speaker
2. Microphone switched on but is
not being used.
3. Microphone volume may be
too loud
4. Mobile phone is being used too
close to the speaker
5. Other wireless equipment may
be placed very close to the
speaker.
PARTY-BOX212
Solution
1. Connect an AUX signal
2. Adjust volume
1. Plug in the mic properly
2. Switch mic on
3. Increase mic volume
1. File format should be MP3
2. Plug in USB/SD card properly
1. Keep the microphone 2m away
from the speaker
2. Turn off microphone if not in use.
3. Adjust microphone volume to
lower mode
4. Keep mobile away from the
speaker whilst attending a call.
5. Keep the speaker away from
other wireless equipment
F
5