DAY Useful Everyday 73203 Manual De Instrucciones página 6

MIRROR WITH LED LIGHT
Introduction
To get the most out of your new mirror
with LED light, please read through these
instructions before use. Please also save the
instructions in case you need to refer to them
at a later date.
Technical data
Dimensions:
Power supply:
Light source:
Total power:
Material:
With built-in dimmer
Use
Insert 4 x 1.5 V AA batteries in the battery
compartment. Check that the batteries are
correctly � tted.
Place your � nger on the touch � eld (a) on the
mirror to switch the light in the mirror frame
on or off .
Keep your � nger on the touch � eld for at
least 3 seconds to change the brightness of
the mirror frame.
18×13.6×2 cm
4 x 1.5 V AAA batteries
(not included)
28 LEDs
5.6 W
Plastic and glass
a
Cleaning and maintenance
Polish the mirror regularly with a soft cloth
dampened with glass cleaner.
Avoid exposing the mirror to water or liquids.
Remove the batteries if you do not intend to
use the mirror for a prolonged period.
Environmental information
Electrical and electronic equipment
(EEE) contains materials,
components and substances that
may be hazardous and harmful to
human health and the environment
if waste electrical and electronic equipment
(WEEE) is not disposed of correctly. Products
marked with a crossed-out wheeled bin are
electrical and electronic equipment. The
crossed-out wheeled bin indicates that waste
electrical and electronic equipment must
not be disposed of with unsorted household
waste, but must be collected separately.
Manufactured in P.R.C.
Manufacturer:
Schou Company A/S
Nordager 31
DK-6000 Kolding
© 2019 Schou Company A/S
All rights reserved. The content of this manual may not
be reproduced, either in full or in part, in any way by
electronic or mechanical means, e.g. photocopying or
publication, translated or saved in an information storage
and retrieval system without written permission from
Schou Company A/S.
GB
6