Intended Use; Technical Data; Parts Of The Machine; Commissioning - Festool CTL SYS Manual De Instrucciones

English
Symbol Meaning
Do not absorb any water or liquids!
Risk of tilting!
3

Intended use

Dust extractor suitable for
4

Technical data

Dust-extractor
Power consumption
Max. electrical outlet module connected load
Max. suction capacity (air), extractor/turbine
Max. vacuum, turbine
Filter surface area
Suction hose
Mains power cable length
Sound pressure level as per EN 60704-2-1/uncertainty K
Vibration value at the cleaning nozzle/instability
Type of protection
Container capacity
Dimensions L x W x H
Weight
5

Parts of the machine

[1-1]
Dust-extractor
[1-2] Storage box
[1-3]
Extractor hose
[1-4] Handle
[1-5]
Angle piece
[1-6] T-Loc lock for Systainers
[1-7] Cold-device plug
[1-8] On/off switch
[1-9] AUTO/MAN switch
[1-10]
Electrical outlet module
12
– extracting dust with limit values up to 1
mg/m³ corresponding to dust class L,
– for increased loads during commercial use,
according to IEC/EN 60335-2-69.
Dust extractor not recommended for continu­
ous extraction of fine dust, such as cement dust
or filler.
The user is liable for improper or non-in­
tended use.
CH, DK, GB
CTL SYS with storage box
only CTL SYS
CTL SYS with storage box
The specified figures appear at the beginning of
the operating manual.
6

Commissioning

WARNING
Unauthorised voltage or frequency!
Risk of accidents
► Observe the specifications on the ma­
chine's name plate.
► Observe country-specific regulations.
1000 W
EU 1200 W
1300 W
AUS 1400 W
108 m³/h / 180 m³/h
200 hPa
5357 cm²
D 27 mm x 3.0 m-AS
67 dB(A)/3 dB
< 2.5 m/s 2 / 1.5 m/s
396 x 296 x 270 mm
396 x 296 x 162 mm
5.0 m
2
IP X0
4,5 l
6.9 kg