Sime SOLO-DUETTO 25 TSE Instrucciones Para El Instalador Y Para El Servicio De Asistencia página 80

2.7.2 DUETTO 25 BF TSE wiring diagram (fig. 9/a)
KEY
F1-2 Fuse (4 AT)
PI C.H. pump
PB Tank pump
TS Safety thermostat
SM C.H. sensor
TPA Water pressure transducer
FLS D.H.W. pressure
TA1 Zone 1 room thermostat
TA2 Zone 2 room thermostat
CR Remote control CR73 (optional)
2.7.3 SOLO 25 BF TSE / DUETTO 25 BF TSE functional diagram
Consensus for start-up
Heater stat
Heater
Motor
Ignition transform.
Gas-oil valve
Flame
Stop light
NOTE: On DUETTO 25 BF TSE without stat, the heater is always fed in winter position.
80
Normal
0÷150 s ~ 12 s
OP Programming clock (optional)
EXP Expansion card
AR Remote alarm
VZ Zone valve
AUX Auxiliary connection
BRU Gas-oil burner
K1-2 Relay
NOTE: Connect TA1 to the clamps 7-8 after having
removed the bridge.
Stopped due to failure to ignite
0÷150 s ~ 12 s
Fig. 9/a
~ 5 s