Cycle Guide - Whirlpool 3LWED5500 Manual De Uso

CYCLE GUIDE — AUTOMATIC CYCLES
Not all cycles and settings are available on all models. Settings and options shown in bold are default settings for that cycle.
AUTOMATIC DRY – Senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness level.
Depending on model, temperature may be selected on cycle knob or be a separate control.
Items to dry:
Jeans, heavy work clothes, towels
Work clothes, medium weight fabrics,
sheets
Casual, shirts, pants, lightweight items,
synthetics, delicates, athletic wear
NOTE: If loads do not seem as dry as you would like, select More Dry next time you dry a similar load. If loads seem drier than you
like, select Less Dry next time you dry a similar load.
CYCLE GUIDE — TIMED DRY
Not all cycles and settings are available on all models.
TIMED DRY – Will run the dryer for the specified time on the control. Depending on model, temperature may be selected on cycle
knob or be a separate control.
Items to dry:
Any load
Rubber, plastic, heat
sensitive fabrics
COOL DOWN – This step is added to any cycle that uses heat. The load is cooled slowly to reduce wrinkling and make it easier to
handle.
Setting the Drying Temperature
If your dryer has multiple heat settings:
A High heat setting may be used for drying heavyweight items
such as towels and work clothes.
A Low to Medium heat setting may be used for drying
medium-weight items such as sheets, blouses, dresses,
underwear, permanent press fabrics, and some knits.
6
Cycle:
Drying
Temperature:
More Dry High
Normal Dry Medium
Less Dry Low
Drying
Cycle:
Temperature:
Timed Dry Any
Air Dry
Timed Dry
Available
Options:
Gives the best drying in the shortest time.
Drying time varies based on fabric type,
load size, and dryness setting.
Select a drying temperature based on
Wrinkle Shield
the fabrics in your load. If you are unsure
Cycle Signal
of the temperature to select for a load,
select the lower setting rather than the
higher setting.
Available
Options:
Dries items to a damp level for items that
do not require an entire drying cycle.
Select a drying temperature based on
the fabrics in your load. If you are unsure
Temp
of the temperature to select for a load,
Wrinkle Shield
select the lower setting rather than the
Time Adjustment
higher setting.
Cycle Signal
Use a no heat (air dry) setting for foam,
rubber, plastic, or heat-sensitive fabrics.
Use a no heat (air dry) setting for foam, rubber, plastic,
or heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures
for various loads, refer to the care label directions.
Cycle Details:
Cycle Details: