Notes On Instrument Safety; General Safety Notes; Instrument Safety And Emc - Zeiss Primo Star Instrucciones De Manejo

Carl Zeiss
1

NOTES ON INSTRUMENT SAFETY

1.1

General safety notes

Please read this Operating Manual carefully before starting up the microscope.
If you need supplementary information, contact Carl Zeiss Service or an authorized agency.
To ensure safe operation and troublefree function of the microscope, strictly observe the precautions and
warnings given in this manual.
These are set off herein as follows:
CAUTION
This symbol indicates a possible hazard to the user of the instrument.
CAUTION
This symbol indicates a possible hazard to the instrument or system.
CAUTION
Disconnect the plug-in power unit from line power before opening the microscope!
NOTE
This symbol refers you to advice that you must observe under all circumstances.
1.2

Instrument safety and EMC

The Primo Star microscope has been designed, produced and tested in compliance with the standards
DIN EN 61010-1 (IEC 61010-1) and IEC 61010-2-101 "Safety requirements for electrical equipment for
measurement, control and laboratory use ".
The Primo Star microscope meets the requirements of the EC Directive 98/79/EC Annex 1 and carries the
mark.
Radio-noise suppression in compliance with EN 55011 Class B
Noise immunity in compliance with DIN EN 61326
The instruments are disposed of in compliance with the WEEE Directive 2002/96/EC.
4
Notes on Instrument Safety Primo Star
B 46-0071 v 03/06