Publicidad
1. To enter the router's Web interface (WebUI), type
2. Use login information shown in image A when prompted for authentication.
3. After you login, you will be prompted to change your password for security reasons. The new password must
contain at least 8 characters, including at least one uppercase letter, one lowercase letter and one digit. This step is
mandatory and you will not be able to interact with the router's WebUI before you change the password.
4. When you change the router's password, the
used to setup some of the router's main operating parameters.
5. Go to
Overview
page and pay attention to the
performance try adjusting the antennas or changing the location of your device to achieve the best signal
conditions.
RF technologies
Max RF power
Power adapter
Mobile antenna
WiFi antenna
*Order code dependent.
**Higher gain antenna can be connected to compensate for cable attenuation when a cable is used. The user is responsible for the compliance with the legal regulations.
LOGIN TO DEVICE
http://192.168.1.1
Configuration Wizard
Signal Strength
TECHNICAL INFORMATION
Radio specifications
2G, 3G, 4G, WiFi
33 dBm@GSM, 24 dBm@WCDMA, 23 dBm@LTE, 20 dBm@ WiFi
Bundled accessories specifications*
Input: 0.4A@100-240VAC, Output: 9VDC, 1A, 4-pin plug
698~960/1710~2690 MHz, 50 Ω, VSWR<3, gain** 3 dBi, omnidirectional, SMA male connector
2400~2483.5 MHz, 50 Ω, VSWR<2, gain** 5 dBi, omnidirectional, RP-SMA male connector
into the URL field of your Internet browser.
will start. The
indication (image B). To maximize the cellular
Data connection state
State
SIM card slot in use
Bytes received/sent *
Configuration Wizard
-65 dBm
348.7 KB / 223.5 KB
is a tool
Connected
Ready
Publicidad
