LENGTHY APPLIANCE DOWNTIMES
If the appliance is to be out of use for a lengthy pe-
riod, proceed as follows:
1 - cut off the mains electricity supply using the ap-
pliance's master switch;
2 - clean the appliance and the surrounding areas
thoroughly;
USEFUL ADVICE FOR USE
To ensure correct use of the appliance, the follow-
ing rules should be adopted:
– use only the accessories recommended by the
constructor;
– check that the water level never exceeds the
marked level (A);
– never use the appliance for frying.
Caution - warning
Never use the appliance with no water in the
well, as this may damage its structure.
RECOMMENDATIONS FOR SERVICING
Keep the appliance at peak efficiency by carrying
out the scheduled servicing procedures recommen-
ded by the constructor. Proper servicing will allow
the best performance, a longer working life and
constant maintenance of safety requirements.
Caution - warning
Before carrying out any servicing procedure,
activate all the safety devices provided and
decide whether staff at work and those in the
vicinity should be informed.
turn off the electricity supply using the cir-
cuit-breaker and prevent access to all devices
which might people's health and safety at risk
if activated.
3 - spread a film of edible oil over the stainless
4 - carry out all the servicing procedures;
5 - cover the appliance, leaving a few gaps to allow
SERVICING
At the end of each session of use and whenever
necessary, clean:
– the outer casing;
– the well;
– the appliance and the surrounding environment
(see page 10).
Every 100 working hours have skilled, authorised
personnel carry out the following operations:
– check that the safety thermostat is working cor-
In particular,
rectly;
– check that the electrical system is in good work-
ing order.
- 9 -
steel surfaces;
air to circulate.
A
IDM-39604008500.tif
5
IT
GB
DE
FR
ES
English