Rear Wheels Assembly; Attaching The Canopy - Joyello DIN AMICO 4 JL-1003 Manual De Instrucciones

GB JL-1003/JL-1004

REAR WHEELS ASSEMBLY

7) Install the rear wheels F on the rear axle assembly G.
8) Make sure each wheel locks into position with an audible "CLICK".
9) Turn the stroller upside down.
10) Hold the rear wheel/axle assembly G so the brake levers E face toward the parent's handle
11) Slide the rear wheel/axle assembly onto the stroller farme H until each side locks into place with
audible "CLICK".
12) Pull upward on the rear wheel/axle assembly to make sure it is locked securely.
12
ATTACHING THE TRAY
13) Install the child's bumper onto the bumper mounts. Make
sure the tray locks into position J with audible "CLICK".
14) Pull on the child's tray to make sure it is locked into place.

ATTACHING THE CANOPY

15) Install a canopy pivot into
each canopy mount until it
locks into place. Pull upward on
the canopy to make sure it is
securely installed.
WARNING: The canopy is
not intended to provide UV
protection.
12