Hella TC-400 Instrucciones De Montaje página 51

GB SET WARNING LEVELS
Your TPM system is equipped with a 2-stage warning system:
1. First warning is given for pressure loss situations of 25% or more.
2. Second - more firm - alarm is given for pressure loss of 50% or more.
Note: the manufacturer strongly recommends maintaining default system settings to
avoid false alarms triggered by temperature/pressure variations.
Note: using lower minimum level settings may result in dangerous driving situations.
Note: the high pressure alert is deleted if the set pressure level is above 52 PSI
Default system settings are 25% for the first stage warning and 50% for the second
stage alert. Pressure levels can be adjusted upon personal preference using following
5 5 1 1
procedure:
SET STANDARD PRESSURE
GB
& WARNING LEVELS
Press and hold Check button for 6 seconds.
7
Display shows 75
Keep pressing Check button to adjust first stage
8
warning level between 60% and 90%.
Note: this means pressure loss varying between
10% and 40%.
1x
6 Sec.