Input Menu - Fracarro SIG7531 Instrucciones De Uso

5.3.4 SIG7531-SIG7540 GENERAL MENU
SIG7531
SIG7540
Setting the output parameters
Measurements of the input and
output signal
COMMON INTERFACE
Settings menù
(ONLY FOR SIG7540)
Confirm the settings by pressing the
pressing the S key after the modules programmation.
Available PRESET for
custom settings storage
INPUT PRESET
Frequency input
INPUT FREQUENCY
settings
Modulation
HI/LO PRIORITY
priority settings
SERVICE LIST menu
continues at following
page
Setting the input parameters
INPUT
OUTPUT
MEASURES
COMMON INTERFACE
key; save the settings by

5.3.5 INPUT MENU

OFF PRESET 1 PRESET 15
Enter by
LOAD PRESET
SAVE PRESET
Settings by
frequency
SEL. BY FREQ. FREQUENCY (MHz)
BANDWIDTH
SEL. BY CHANNEL COUNTRY
Settings by
channel
IN CHANNEL
Input frequency offset
setting
Low High
Confirm the settings by pressing the
save the settings by pressing the S key after
the modules programmation.
23
INPUT MENU see page
23-24
OUTPUT MENU see page
25
MEASURES MENU see page
26
COMMON INTERFACE MENU
27
see page
The LOAD and SAVE PRESET functions
allows you to store the following
parameters: BANDWIDTH, FREQUENCY,
CHANNEL, OFFSET, HI/LO PRIORITY
Enter by
STATUS and channel shown, but not stored
LIST OF DECRYPTING PROGRAMS (only
for SIG7540), the TS OUT status, the video
Loading... format, the AUDIO TYPE and LEVEL and
the VIDEO STANDARD output.
Increase/decrease from TPE by using the
arrow keys, or enter the value directly from
the keyboard.
174
7
Europe
E5
OFFSET -3
key;
862
8
Europe
France
UK
UK
Australia
E69
-3
-2
-1
+3
0
+1
+2
+3