Before Operation; Throttle Lever; Catalytic Converter - Maruyama BL5100 Manual Del Operador

(
PRIMER BULB
( Be sure the power blower is correctly assembled and all fasteners and fittings are properly secured.

THROTTLE LEVER

Before operating the power blower, release the knob, rotate the
throttle arm to the position in the illustration, and tighten knob to
secure in place.
When the power blower is strapped to the back of the operator,
the throttle lever of the BL5100 and BL8100 is located on the left
side
CAUTION! (for BL5100)

1.Catalytic Converter

This product is equipped with a catalytic converter in the exhaust system to significantly reduce
exhaust emissions. The catalytic converter converts carbon
monoxide and hydrocarbons into harmless carbon dioxide and
water.
The catalytic converter requires special care.
• Use only unleaded gasoline. Never use leaded gasoline.
Leaded gasoline significantly reduces the capability of the
catalytic converter.
(
• Do not use 2-cycle
(Pb), or Sulfur (S). These elements will reduce the life and
performance of the catalytic converter.
oil
RECOIL STARTER
ENGINE
BLOWER HOUSING
BAND
FUEL TANI<
RETURN PIPE
HIP BELT

BEFORE OPERATION

that contains Phosporus
(P),
HANDLE
SWIVEL PIPE
SERIAL NUMBER
(BLOWER HOUSING)
THROTTLE
LEVER
Lead
-8-
END/BENT
SHOULDER
• STRAPS
1l
BACK PAD
'""���:-----
KNOB
ITCH
THROTTLE
ARM
English