BABYTREND HC57XXXB Manual De Instrucciones página 3

ASSEMBLY
IMPORTANT!
To ensure safe operation of your product, please follow
these instructions carefully. Please keep these instructions for future reference.
IMPORTANT!
Before assembly and each use, inspect this product
for damaged hardware, loose joints, missing parts or sharp edges. NEVER
use if any parts are missing or broken.
IMPORTANT!
Adult assembly is required.
IMPORTANT!
Always check that the high chair is locked in the open
position before using.
ATTENTION:
Carefully remove parts from box. Check that
you have all the parts for this model before
assembling the high chair. NOTE: Certain
High Chair models are packaged with the
High Chair Seat Fabric and Body Insert
already attached to the Seat Back.
TO ASSEMBLE FRAME
1) • Take either the left or right Upper Frame
Assemblies, press and hold the button
and extend the frame then release the
button (Fig 1a).
• Insert the front tube of the right and left
side Upper Frame Assemblies into the
Height Adjuster (Fig. 1b). The front tube
is easily distinguished from the rear
tube by the array of holes located on the
backside of the front tube.
3
Copyright © 2018, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
2)
3)
Button
Fig. 1a
Fig. 1b
• Squeeze the Release Handles on both
sides simultaneously and push the tube
through the Height Adjusters until it locks
in the highest position (Fig. 2).
• Connect the Front and Rear Legs to the
Upper Frame Assemblies by inserting
the tube ends into the extension tubes
Separate the A and B tubes (Fig. 3a).
Facing the front legs the A tubes connect
to the left leg and B tubes connect to
the right leg. Facing the rear legs A
tubes connect to the left leg and B tubes
connect to the right leg (Fig 3b).
NOTE: Legs are properly connected
when the lock buttons are lined up with
the holes on the ends of the Upper
Frame Assemblies. Make sure the lock
buttons are engaged before use.
Copyright © 2018, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
ASSEMBLY
Release Handle
Fig. 2
A B A B
Fig. 3a
A
Extension Tubes
B
B
A
Rear Leg
Front Leg
Fig. 3b
4